|
MIST
SEPARATOR
Mist Separator Sizing For Low Pressure
Boilers
|
|
|
LBS. PER HOUR OF STEAM
|
|
MODEL
|
500#/hr.
|
1,000#/hr.
|
1,500#/hr.
|
2,500#/hr.
|
5,000#/hr.
|
7,500#/hr.
|
10,000#/hr.
|
|
5 psig
|
MSI
|
3"-8"-38"
|
5"-10"-46"
|
6"-14"-50"
|
6"-18"-58"
|
8"-24"-70"
|
8"-30"-78"
|
10"-36"-90"
|
|
MBI
|
3"-8"-26"
|
5"-10"-30"
|
6"-14"-34"
|
6"-18"-38"
|
8"-30"-52"
|
8"-30"-52"
|
10"-36"-58"
|
|
MTI
|
3"-8"-32"
|
5"-10"-40"
|
6"-16"-48"
|
6"-18"-52"
|
8"-30"-74"
|
8"-30"-74"
|
10"-36"-84"
|
|
10 psig
|
MSI
|
3"-8"-38"
|
5"-10"-46"
|
6"-12"-50"
|
6"-16"-58"
|
8"-24"-70"
|
8"-30"-78"
|
10"-30"-84"
|
|
MBI
|
3"-8"-26"
|
5"-10"-30"
|
6"-12"-32"
|
6"-16"-36"
|
8"-24"-44"
|
8"-30"-52"
|
10"-30"-52"
|
|
MTI
|
3"-8"-32"
|
5"-12"-40"
|
6"-14"-44"
|
6"-16"-48"
|
8"-24"-64"
|
8"-30"-74"
|
10"-30"-76"
|
|
12 psig
|
MSI
|
3"-6"-34"
|
5"-10"-48"
|
6"-12"-50"
|
6"-14"-50"
|
8"-20"-64"
|
8"-30"-78"
|
10"-30"-84"
|
|
MBI
|
3"-6"-24"
|
5"-10"-30"
|
6"-12"-32"
|
6"-14"-34"
|
8"-24"-44"
|
8"-30"-52"
|
10"-30"-52"
|
|
MTI
|
3"-8"-32"
|
5"-12"-40"
|
6"-14"-44"
|
6"-16"-48"
|
8"-24"-64"
|
8"-30"-74"
|
10"-30"-76"
|
Model No. "Inlet Size-Diameter-Height". Other sizes
are available in our Complete Catalog.
Mist Separator Sizing Other Applications
The proper selection of a Mist Separator for your specific
application can best be obtained by presenting detailed
information to Penn Separator. Include the following information
where possible. With this information Penn can offer a proposal
on a separator for your specific needs.
| 1.
Flow Rate |
5.
Liquid Partical Size. |
| 2.
Vapor Density. |
6.
Process and System Description. |
| 3.
Liquid Density. |
7. Operating Pressure and Temperature. |
| 4.
Liquid Viscosity |
8.
Line Size Horizontal or Vertical. |
Suggested
Specifications
Furnish and install
as shown on plans a Mist Separator Syle MTI, MSI, or MBI constructed
of Carbon or Stainess Steel built according to ASME Code for
150 psig @ 450 deg. F. or _________ psig as required for the
application. The mist separator will include a fine wire 304
stainless steel mist eliminator element centrally located
and selected to provide a 99+% efficiency for entrained liquids
10 micron size and larger witha pressure drop not exceeding
3" of water.
The separator is
to include a 150# Flanged inlet and outlet _________"
size to match the line size. Couplings are included for the
entrainment drain, inspection ports, and element backwash
connection. The exterior of the unit includes a coat of shop
primer.
|
